HOMREE 18 Kinds of Functions in One DC 12V Multifunction PLC Relay Cycle Timer Module Home Automation Delay Module


Tips: Function 1-8 start automatically at power-up, the function 9-18 need high pulse signal (high duration is shorter than 20ms, hereinafter the same) trigger the start, the function 9 is a self-locking mode, the function 10 is level control mode.

Two module interface:
Relay outputs: a 3-wire interface, all interfaces are terminals
1——- NO: normally open relay interface, the relay becomes vacant before, pull shorting after the COM1
2———COM: Common Interface Relays
3——— NC: normally closed relay interface relay shorted before and COM1, pull vacant post
Load capacity: normally open port maximum load capacity: DC 0-30V/10A, AC 0-250V/10A
NC port maximum load capacity: DC 0-28V/10A, AC 0-125V/10A
Dimensions: 4.0 * 6.6cm, screw 4, diameter 3.0mm

Package include:
1 x DC 12V multifunction relay
Users can display the buttons and select the following 18 kinds of functions in one, you can set and save function parameters, you can also view the current function parameters, time parameter sets the minimum 0.1 seconds adjustable, accuracy better than 0.01 seconds, with regard to the specific Set operating instructions, you can obtain a copy from the seller. if you need instructions, please send email to tell us , thanks.
Relay outputs: a 3-wire interface, all interfaces are terminals.
NO: normally open relay interface, the relay becomes vacant before, pull shorting after the COM1 ; COM: Common Interface Relays.
NC: normally closed relay interface relay shorted before and COM1, pull vacant post Load capacity: normally open port maximum load capacity: DC 0-30V/10A, AC 0-250V/10A.
Dimensions: 4.0 * 6.6cm, screw 4, diameter 3.0mm.

$15.02


 

Customer Feedback

Shares
|ShareTweet

Leave a Reply

Your email address will not be published. Required fields are marked *


*